hayden@cosuper.com

HOME   |   PRODUCTS

PRODUCTS

  • Off Grid Solar & ESS
  • Off Grid Solar & ESS
Off Grid Solar & ESSOff Grid Solar & ESS

Off Grid Solar & ESS

  • type: off-grid
  • dc voltage: 12v/24v/48v
  • AC voltage: 100v-120v/220v-240v
  • power range:1kw--60kw
  • Product description: Cosuper power inverters are perfect for off grid solar & ESS. We have pure sine wave inverters and other accessories for solar system. Visit us to find the right power product for you.
  • INQUIRY
An off-grid solar system is designed for the power needs of mid-to-large size homes or region. Unlike a grid-tie solar system, off-grid systems have no connection with the utility grid, and must make all the electricity necessary for your home or region.

Advantages of Off-Grid Solar Systems
1. No access to the utility grid
Off-grid solar systems can be cheaper than extending power lines in certain remote areas.

2. Become energy self-sufficient
Living off the grid and being self-sufficient feels good. For some people, this feeling is worth more than saving money. Energy self-sufficiency is also a form of security. Power failures on the utility grid do not affect off-grid solar systems.

On the flip side, batteries can only store a certain amount of energy, and during cloudy times, being connected to the grid is actually where the security is. You should install a backup generator to be prepared for these kinds of situations.

Typical off-grid solar systems require the following extra components:

Solar Charge Controller
Battery Bank
DC Disconnect (additional)
Off-Grid Inverter
Backup Generator (optional)

Solar Charge Controller
Solar charge controllers are also known as charge regulators or just battery regulators. The last term is probably the best to describe what this device actually does: Solar battery chargers limit the rate of current being delivered to the battery bank and protect the batteries from overcharging.

Good charge controllers are crucial for keeping the batteries healthy, which ensures the lifetime of a battery bank is maximized. If you have a battery-based inverter, chances are that the charge controller is integrated.

Battery Bank
Without a battery bank (or a generator) it’ll be lights out by sunset. A battery bank is essentially a group of batteries wired together.

DC Disconnect Switch
AC and DC safety disconnects are required for all solar systems. For off-grid solar systems, one additional DC disconnect is installed between the battery bank and the off-grid inverter. It is used to switch off the current flowing between these components. This is important for maintenance, troubleshooting and protection against electrical fires.

Off-Grid Inverter
There`s no need for an inverter if you`re only setting up solar panels for your boat, your RV, or something else that runs on DC current. You will need an inverter to convert DC to AC for all other electrical appliances.

Off-grid inverters do not have to match phase with the utility sine wave as opposed to grid-tie inverters. Electrical current flows from the solar panels through the solar charge controller and the bank battery bank before it is finally converted into AC by the off-grid-inverter.

Backup Generator
It takes a lot of money and big batteries to prepare for several consecutive days without the sun shining (or access to the grid). This is where backup generators come in.

In most cases, installing a backup generator that runs on diesel is a better choice than investing in an oversized battery bank that seldom gets to operate at it`s full potential. Generators can run on propane, petroleum, gasoline and many other fuel types.

Backup generators typically output AC, which can be sent through the inverter for direct use, or it can be converted into DC for battery storage.

Recommended Products

SPE series hybrid inverter 1kw--5kw

description:
1. With built-in PWM/MPPT solar charge controller
2. High power factor up to 1
3.Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc.)
4. Programmable AC Under-Voltage(90~280VAC) shutdown to operate under weak shore power
5. Optimize battery by equalization function

SPE-S hybrid inverter 3000w/5000w

description:
1.Auto switch between Utility AC and Battery with minimum 10 milliseconds as UPS
2.Built-in 80A MPPT solar charger, MAX. 4000 watt PV input
3. Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc.)
4. Manual switch priority power source among Solar, Utility, and Battery
5. Pure sine wave output for sensitive and motor loads

CPS series hybrid inverter 3kw---12kw

description:
1. DIP Switches: Low Battery, AC Input Range, Power Saver, Solar/Utility AC Priority
2.Built-in relay and AC/DC breaker
3. Have battery type selector for different type batteries
4. MPPT solar charge controller. MAX PV volt 150VDC
5. RJ45 Remote control and RS232 network

PES series integrated solar system 1.4kwh---5.7kwh

description:
1. Integrated energy storage design, Intelligent UI display
2. Auto switch 5 FUN: DC to AC, AC bypass, AC charger, and UPS
3. Idle consumption down 50% than the traditional low-frequency inverter
4. Remote control: Monitor by mobile APP( Blue Tooth)
5. RS232 network communication interface (optional)

PWM/MPPT solar charge controller

description:
1. 12V/24V/36V/48Vauto
2. Dual wave or multiple peaks tracking technology
3. RS - 232, the RS485 communication way (optional)
4. Three/Four stages of optimizing charging control
5. used in all kinds of harsh environment
Scan the qr codeClose
the qr code